UV DTF Gang Sheet Builder — Custom Transfers for Hard Surfaces

You Send It. We Print It.

Create a sheet of custom designs for compatible hard, smooth surfaces. Combine logos, names, and artwork using our online gang sheet builder.

You’re ordering printed UV DTF transfers. Cups, containers, and other blank items are not included. No heat press is required.

Same-Day Printing & Shipping

Order before 1 PM Central, Monday–Friday, for same-day printing and shipping. Shipping transit time is additional.

Build Your Gang Sheet

1. Choose Create Design.
2. Open the gang sheet builder 2.0 and upload your artwork.
3. At the top of the page, click the button labeled Longer Side and change it to Width x Height.
4. Arrange your designs and check each design’s final print dimensions.
5. Review your layout, complete the builder process, and check out.

Check spelling, sizing, quantities, and unwanted backgrounds before submitting your order.

How to Apply

1. Clean and dry the surface, removing dust, oil, and residue.
2. Cut out your design, leaving the backing and clear transfer film in place.
3. Rub the transfer firmly with a squeegee.
4. Slowly peel away the backing, keeping the entire design on the clear film.
5. Carefully position the design and press from the center outward.
6. Rub firmly, then slowly peel the clear film away at a low angle. If any part lifts, lay the film back down and rub again.

For Hard Surfaces

UV DTF transfers are intended for compatible hard, smooth surfaces. They are not garment transfers.

Printing for Apparel?

Choose our DTF Gang Sheet Builder for transfers applied with a heat press.